The turning and milling compound water wheel rotary transfer machine can process the workpiece efficiently and with high precision, and has the functions of drilling and wiring. Suitable for all kinds of metal materials, broken shaft products and water heating industry parts processing. This method is easy to program and has high processing precision. It is the ideal equipment for machining complex shaft parts.

When using the water wheel rotary transfer machine, the ambient temperature must be kept constant. The available ambient temperature is 10-40 ° C. When the ambient temperature is 20 ° C, the humidity should be 40-75%. In order to keep the static accuracy of the machine tool within the specified range, the ambient temperature is required to be 15-25 ° C, and the temperature difference within 24 hours shall not exceed ±2.

When the voltage is unstable, the machine should be equipped with a stable power supply to ensure the normal operation of the machine. The lathe should also be reliably grounded. The ground cable is a copper wire with a diameter of not less than 10mm2 and a ground resistance of not less than 4 ohms.

The daily use of turning and milling compound water wheel rotary transfer machine should be away from direct sunlight, vibration sources and heat sources, to avoid too wet, excessive dust or corrosive gases. Corrosive gases may cause corrosion and deterioration of electronic components, resulting in poor contact between components or short circuit, which affects the normal operation of the device. Precision CNC equipment should be kept away from the vibration of larger equipment, such as punches, forging and stamping equipment.

water wheel rotary transfer machine should not be stored for a long time, and the control system of the machine tool should be made full use of after purchase, especially in the first year of use, which is easy to lead to the failure of the weak link, and exposed as soon as possible, and eliminated within the warranty period. In order to ensure the normal working performance of the equipment, when the compressed air of the air source can not meet the requirements of the air source, a set of air source drainage device (dehumidification, oil removal, filtration) should be installed in front of the air. Entrance to the machine tool.

When there is no processing task, the water wheel rotary transfer machine should also be turned on regularly, it is best to power up 1-2 times a week, each empty operation for about 1 hour, in order to use the heat of the machine itself to reduce the humidity in the machine. The electronic components are not affected by moisture, and the battery alarm can be found in time to prevent the loss of system software and parameters.

water wheel rotary transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html